CLICK IMAGE TO ENLARGE

Series photo of the sample display unit marked “20”. It is not a CDD16-TF photograph.

STAND-ON ELECTRIC PALLET STACKER

CDD20-TF

The CDD16/20-TF stand-on electric pallet stacker series offers rated capacities of 1,600 and 2,000 kg, with mast lift heights from 1.6 to 4.0 metres. Standard features include protective arms, a folding platform, a 48 V permanent-magnet brushless drive system, mechanical steering, and electromagnetic/regenerative braking. Lead-acid and lithium battery configurations are listed. Permissible loads depend on lift height and operating conditions; refer to the applicable load curve.

SERIES
CDD16/20-TF
BRAND
HELI
LOAD CAPACITY
2,000 kg
LIFT HEIGHT
1.6–4.0 m

Equipment Anhui Qirui can supply. Specifications follow the HELI (合力) sample sheet. Anhui Qirui is not the manufacturer or an authorized distributor unless authorization documentation is provided.

CONFIGURATION

Model, mast height and battery

Choosing a lift height updates the paired working height and retracted static height. These values are not interchangeable.

Selected model

CDD20-TF · 2,000 kg

Mast lift height

1,600 mm

Max. height in operation

2,072 mm

Static height, mast retracted

1,312 mm

Battery

Lead-acid battery · 48 V / 65 Ah

Charger

48 V / 8 A

Battery weight

15×4 kg (60 kg)

Truck weight, incl. battery

725 kg

Drive / lift motor

BLDC 1.2 kW · DC 2.2 kW

Permissible load changes with lift height and operating conditions. Use the load curve for the selected model. The sample mentions a standard 1.8 m limit without describing the control logic; this page states automatic lift limiting only and does not treat 1.8 m as the maximum lift height.

Request Quote for: CDD20-TF · 1,600 mm · 48 V / 65 Ah
MODEL DIFFERENCES

CDD16-TF and CDD20-TF

Loaded / unloaded values are shown in the original order.

ParameterCDD16-TFCDD20-TF
Rated capacity1,600 kg2,000 kg
OperationStand-onStand-on
Max. travel speed, loaded / unloaded4.2 / 5 km/h4.2 / 5 km/h
Max. lift speed, loaded / unloaded85 / 155 mm/s105 / 175 mm/s
Max. lowering speed, loaded / unloaded144 / 104 mm/s115 / 110 mm/s
Gradeability, loaded / unloaded6 / 10%6 / 10%
Drive motorBLDC 1.0 kWBLDC 1.2 kW
Lift motorDC 2.2 kWDC 2.2 kW
ControllerHELIHELI
MAST HEIGHTS

Six lift heights, shared by both models

Earlier catalogue lines listed only some of these heights. The full set below follows the current sample sheet.

Mast lift heightMax. truck height in operationStatic height, mast retracted
1,600 mm2,072 mm1,312 mm
2,000 mm2,472 mm1,512 mm
2,500 mm2,972 mm1,762 mm
3,000 mm3,472 mm2,012 mm
3,500 mm3,972 mm2,262 mm
4,000 mm4,472 mm2,512 mm
BATTERY, CHARGER AND WEIGHT

Battery configurations

ModelBattery typeVoltage / capacityChargerBattery weightTruck weight, incl. battery
CDD16-TFLead-acid battery48 V / 65 Ah48 V / 8 A15×4 kg (60 kg)710 kg
CDD16-TFLithium battery48 V / 60 Ah48 V / 25 A25 kg675 kg
CDD20-TFLead-acid battery48 V / 65 Ah48 V / 8 A15×4 kg (60 kg)725 kg
CDD20-TFLithium battery48 V / 60 Ah48 V / 25 A25 kg690 kg

The source labels the rows “lead-acid battery” and “lithium battery”. It does not state a further lithium chemistry. Do not read the lithium row as a confirmed LFP pack.

STANDARD FEATURES

Основные характеристики

01

High-strength forks

02

Mast combining C-section and H-section channel

03

High-position speed-limit switch: travel speed is reduced when lift height exceeds 1.5 m

04

Automatic lift limiting

05

Built-in charger as standard

06

Wire-mesh mast guard as standard

07

48 V permanent-magnet brushless drive motor

08

Emergency power cut-off switch as standard

09

Emergency reverse safety device on the tiller

10

Card management system with binding function as standard

11

Centre-mounted mechanical steering, with protective arms and a folding platform as standard

Другое оборудование

CPDA three-wheel electric counterbalance forklift, series image
03 / CPDA10-30 / CPDA15-30

CPDA Series Three-Wheel Electric Counterbalance Forklift

1.0 / 1.5 t · Seated · Electric / AC

The CPDA three-wheel electric counterbalance forklift series offers 1.0 and 1.5 tonne models with seated operation, AC drive and electronic steering. Its compact design combines an 880 mm overall width with a 1,425 mm minimum turning radius.

3,000 mm lift · 880 mm width · 1,425 mm turning radius · 500 mm load centre

Смотреть продукт
LET’S TALK ABOUT YOUR NEXT PROJECT

The right equipment. The right partner.

Tell us what you need. We’ll help you find a practical solution.

Запросить цену