Exterior illustration: the vehicle shown is the lithium-ion version, not a photo of every configuration.
HELI CPD08/10/12SQ H4 Series Three-point Electric Counterbalance Forklifts
The HELI H4 Series CPD08/10/12SQ three-point electric counterbalance forklifts offer rated capacities of 0.8, 1.0 and 1.2 tonnes at a 400mm load centre. Lead-acid and lithium-ion configurations are available. The series uses AC drive and lift control, with a 3.0kW drive motor and a 4.5kW lift motor. Overall width is 900mm and wheelbase is 1,150mm. Standard lift height is 3,000mm, with basic and wide-view triplex full-free-lift mast options. Truck weight, dimensions and permissible loads depend on the selected model, battery and mast.
- BRAND
- HELI / 合力
- POWER
- Electric
- OPERATION
- Seated
- LOAD CENTRE
- 400 mm
- RATED CAPACITY
- 800 / 1000 / 1200 kg
- STANDARD LIFT
- 3000 mm
Configure your H4 series
Select a model, battery type, configuration number, battery and mast. Availability and actual specifications are subject to confirmation.
Mast table truck weight: 1750 kg (source value). A1 and A5 share the source parameters; functional differences are not specified.
Exterior illustration: the vehicle shown is the lithium-ion version, not a photo of the lead-acid configuration.
Caractéristiques principales complètes
Plomb-acide 08 / 10 / 12 puis lithium 08 / 10 / 12. La colonne sélectionnée est mise en évidence. Sur mobile, faites défiler le tableau.
Les valeurs de performance sont en charge / à vide ; les charges par essieu avant / arrière ; les poids avec / sans batterie. Les données concernent les configurations standard du document, pas toutes les batteries ou tous les mâts en option.
| N° | Paramètre | Unité | Plomb-acide CPD08SQ | Plomb-acide CPD10SQ | Plomb-acide CPD12SQ | Lithium-ion CPD08SQ | Lithium-ion CPD10SQ | Lithium-ion CPD12SQ |
|---|---|---|---|---|---|---|---|---|
| 1.01 | Fabricant | — | HELI | HELI | HELI | HELI | HELI | HELI |
| 1.02 | Modèle | — | CPD08SQ | CPD10SQ | CPD12SQ | CPD08SQ | CPD10SQ | CPD12SQ |
| 1.03 | Code de configuration | — | A1H4 / A5H4 | A1H4 / A5H4 | A1H4 / A5H4 | A1LIH4 / A5LIH4 | A1LIH4 / A5LIH4 | A1LIH4 / A5LIH4 |
| 1.04 | Capacité nominale | kg | 800 | 1000 | 1200 | 800 | 1000 | 1200 |
| 1.05 | Centre de charge | mm | 400 | 400 | 400 | 400 | 400 | 400 |
| 1.06 | Énergie | — | Plomb-acide | Plomb-acide | Plomb-acide | Lithium-ion | Lithium-ion | Lithium-ion |
| 1.07 | Mode de conduite | — | Conducteur assis | Conducteur assis | Conducteur assis | Conducteur assis | Conducteur assis | Conducteur assis |
| 1.08 | Porte-à-faux avant | mm | 305 | 305 | 305 | 305 | 305 | 305 |
| 1.09 | Empattement | mm | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 |
| 2.01 | Poids avec / sans batterie | kg | 1750/1557 | 1920/1655 | 2040/1740 | 1670/1555 | 1860/1745 | 1990/1870 |
| 2.02 | Charge par essieu en charge, avant / arrière | kg | 2210/340 | 2510/410 | 2850/390 | 2110/360 | 2430/430 | 2750/440 |
| 2.03 | Charge par essieu à vide, avant / arrière | kg | 910/840 | 875/1045 | 890/1150 | 800/870 | 800/1060 | 810/1180 |
| 3.01 | Type de pneu | — | Plein | Plein | Plein | Plein | Plein | Plein |
| 3.02 | Pneus avant | — | 4.00-8 | 4.00-8 | 4.00-8 | 4.00-8 | 4.00-8 | 4.00-8 |
| 3.03 | Pneus arrière | — | 3.5-5 | 3.5-5 | 3.5-5 | 3.5-5 | 3.5-5 | 3.5-5 |
| 3.04 | Nombre de roues, avant / arrière | — | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 |
| 3.05 | Voie avant | mm | 800 | 800 | 800 | 800 | 800 | 800 |
| 3.06 | Voie arrière | mm | 258 | 258 | 258 | 258 | 258 | 258 |
| 4.01 | Inclinaison du mât avant / arrière | ° | 5/7 | 5/7 | 5/7 | 5/7 | 5/7 | 5/7 |
| 4.02 | Hauteur du mât, fourches au sol et mât vertical | mm | 1975 | 1975 | 1975 | 1975 | 1975 | 1975 |
| 4.03 | Levée libre | mm | 60 | 60 | 60 | 60 | 60 | 60 |
| 4.04 | Hauteur de levée standard | mm | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| 4.05 | Hauteur maximale de travail avec dosseret | mm | 3800 | 3800 | 3800 | 3800 | 3800 | 3800 |
| 4.06 | Hauteur du toit de protection | mm | 1960 | 1960 | 1960 | 1960 | 1960 | 1960 |
| 4.07 | Hauteur du point SIP du siège au sol | mm | 1010 | 1010 | 1010 | 1010 | 1010 | 1010 |
| 4.08 | Hauteur de la broche de remorquage | mm | 425 | 425 | 425 | 425 | 425 | 425 |
| 4.09 | Longueur avec fourches | mm | 2440 | 2440 | 2460 | 2440 | 2460 | 2480 |
| 4.10 | Longueur sans fourches | mm | 1670 | 1670 | 1690 | 1670 | 1690 | 1710 |
| 4.11 | Largeur totale | mm | 900 | 900 | 900 | 900 | 900 | 900 |
| 4.12 | Fourches, épaisseur × largeur × longueur | mm | 30×80×770 | 30×80×770 | 30×80×770 | 30×80×770 | 30×80×770 | 30×80×770 |
| 4.13 | Tablier porte-fourches, ISO 2328 | — | 2A | 2A | 2A | 2A | 2A | 2A |
| 4.14 | Écartement extérieur des fourches, max. / min. | mm | 800/180 | 800/180 | 800/180 | 800/180 | 800/180 | 800/180 |
| 4.15 | Garde au sol en charge au mât | mm | 65 | 65 | 65 | 65 | 65 | 65 |
| 4.16 | Garde au sol en charge au centre de l’empattement | mm | 65 | 65 | 65 | 65 | 65 | 65 |
| 4.17 | Allée de gerbage Ast, palette 800×800 | mm | 2785 | 2785 | 2797 | 2785 | 2797 | 2813 |
| 4.18 | Allée de gerbage Ast, palette 1000×1000 | mm | 2985 | 2985 | 2997 | 2985 | 2997 | 3013 |
| 4.19 | Rayon de braquage extérieur | mm | 1480 | 1480 | 1492 | 1480 | 1492 | 1508 |
| 5.01 | Vitesse de déplacement en charge / à vide | km/h | 10/12 | 10/12 | 10/12 | 10/12 | 10/12 | 10/12 |
| 5.02 | Vitesse de levée en charge / à vide | mm/s | 250/380 | 240/380 | 230/380 | 250/380 | 240/380 | 230/380 |
| 5.03 | Vitesse de descente en charge / à vide | mm/s | 400/330 | 400/330 | 400/330 | 400/330 | 400/330 | 400/330 |
| 5.04 | Effort de traction maximal en charge / à vide | N | 3300/3800 | 3300/3800 | 3300/3800 | 3300/3800 | 3300/3800 | 3300/3800 |
| 5.05 | Pente maximale en charge / à vide | % | 13/15 | 12/15 | 10/15 | 13/15 | 12/15 | 10/15 |
| 5.06 | Temps d’accélération sur 10 m en charge / à vide | s | 6.7/6 | 6.7/6 | 6.7/6 | 6.7/6 | 6.7/6 | 6.7/6 |
| 6.01 | Tension / capacité de batterie | V/Ah | 24/240 | 24/360 | 24/420 | 24/250 | 24/250 | 24/280 |
| 6.02 | Poids de batterie | kg | 193 | 265 | 300 | 115 | 115 | 120 |
| 7.01 | Puissance du moteur de traction, S2-60min | kW | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 |
| 7.02 | Puissance du moteur de levage, S3-15% | kW | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 |
| 7.03 | Commande du moteur de traction | — | MOS / courant alternatif | MOS / courant alternatif | MOS / courant alternatif | MOS / courant alternatif | MOS / courant alternatif | MOS / courant alternatif |
| 7.04 | Commande du moteur de levage | — | MOS / courant alternatif | MOS / courant alternatif | MOS / courant alternatif | MOS / courant alternatif | MOS / courant alternatif | MOS / courant alternatif |
| 8.01 | Frein de service / stationnement | — | Hydraulique / mécanique | Hydraulique / mécanique | Hydraulique / mécanique | Hydraulique / mécanique | Hydraulique / mécanique | Hydraulique / mécanique |
| 8.02 | Pression de service des accessoires | MPa | 14.5 | 14.5 | 14.5 | 14.5 | 14.5 | 14.5 |
CPD12SQ plomb-acide : tableau principal 2040 kg avec batterie / 1740 kg sans ; tableau du mât M300 2050 kg. Les tableaux diffèrent ; confirmation du fabricant nécessaire. Ne recalculez pas les charges par essieu.
Structure à trois points : le document indique 2/2 roues avant / arrière ; la paire arrière constitue un point d’appui. Ast comprend déjà le jeu a = 200 mm.
Battery compatibility
● Standard · ○ Optional · — Not available. All batteries are 24 V.
Lead-acid batteries
| Battery brand / capacity | CPD08SQ | CPD10SQ | CPD12SQ | On-board charger |
|---|---|---|---|---|
| 24 V / 240 Ah | ● | — | — | E24V35A-13C22 |
| 24 V / 300 Ah | ○ | — | — | E24V35A-13C22 |
| 24 V / 360 Ah | ○ | ● | — | E24V50A-13C22 |
| 24 V / 420 Ah | ○ | ○ | ● | E24V50A-13C22 |
| 24 V / 480 Ah | — | ○ | ○ | E24V50A-13C22 |
Lithium-ion batteries
| Battery brand / capacity | CPD08SQ | CPD10SQ | CPD12SQ | On-board charger |
|---|---|---|---|---|
| 和鼎 · 24 V / 250 Ah | ● | ● | ○ | E24V50ALI-13C22 |
| 和鼎 · 24 V / 280 Ah | ○ | ○ | ● | E24V50ALI-13C22 |
| 和鼎 · 24 V / 300 Ah | ○ | ○ | ○ | E24V50ALI-13C22 |
| 和鼎 · 24 V / 404 Ah | — | — | ○ | E24V50ALI-13C22 |
| 益佳通 · 24 V / 270 Ah | ○ | ○ | ○ | E24V50ALI-13C22 |
| 益佳通 · 24 V / 300 Ah | ○ | ○ | ○ | E24V50ALI-13C22 |
| 益佳通 · 24 V / 350 Ah | — | — | ○ | E24V50ALI-13C22 |
| 鹏成 · 24 V / 228 Ah | ○ | ○ | ○ | E24V50ALI-13C22 |
| 鹏成 · 24 V / 302 Ah | ○ | ○ | ○ | E24V50ALI-13C22 |
| 鹏成 · 24 V / 346 Ah | — | — | ○ | E24V50ALI-13C22 |
The source marks lithium battery low-temperature heating as standard in a merged row, without specifying applicability by brand or capacity, activation temperature or minimum operating temperature. Lithium chemistry is not specified.
Optional battery weights, truck weights and axle loads are not individually supplied. Charger input power, charging time and plug type are not specified; confirm before ordering.
Masts & permissible loads
All loads use a 400 mm load centre. The selected mast row and model load are highlighted.
Weights are quoted from the mast source table and are not confirmed values for optional battery selections. CPD12SQ lead-acid M300 differs from the main table (2050 kg versus 2040 kg with battery); manufacturer confirmation is required.
| Mast | Lift mm | 0.8 t load kg | 1.0 t load kg | 1.2 t load kg | Collapsed mm | Free lift with backrest mm | 0.8 lithium weight kg | 0.8 lead weight kg | 1.0 lithium weight kg | 1.0 lead weight kg | 1.2 lithium weight kg | 1.2 lead weight kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M200 | 2000 | 800 | 1000 | 1200 | 1475 | 60 | 1617 | 1697 | 1807 | 1867 | 1937 | 1997 |
| M250 | 2500 | 800 | 1000 | 1200 | 1725 | 60 | 1644 | 1724 | 1834 | 1894 | 1964 | 2024 |
| M270 | 2700 | 800 | 1000 | 1200 | 1825 | 60 | 1654 | 1734 | 1844 | 1904 | 1974 | 2034 |
| M300 | 3000 | 800 | 1000 | 1200 | 1975 | 60 | 1670 | 1750 | 1860 | 1920 | 1990 | 2050 |
| M330 | 3300 | 800 | 1000 | 1200 | 2125 | 60 | 1686 | 1766 | 1876 | 1936 | 2006 | 2066 |
| M350 | 3500 | 800 | 1000 | 1150 | 2225 | 60 | 1696 | 1776 | 1886 | 1946 | 2016 | 2076 |
| M370 | 3700 | 750 | 900 | 1000 | 2325 | 60 | 1707 | 1787 | 1897 | 1957 | 2027 | 2087 |
| M400 | 4000 | 700 | 850 | 900 | 2525 | 60 | 1728 | 1808 | 1918 | 1978 | 2048 | 2108 |
| M425 | 4250 | 650 | 800 | 850 | 2675 | 60 | 1744 | 1824 | 1934 | 1994 | 2064 | 2124 |
| M450 | 4500 | 600 | 700 | 750 | 2825 | 60 | 1759 | 1839 | 1949 | 2009 | 2079 | 2139 |
| ZSM360 | 3600 | 700 | 800 | 900 | 1695 | 820 | 1717 | 1797 | 1907 | 1967 | 2037 | 2097 |
| ZSM370 | 3700 | 650 | 750 | 850 | 1725 | 850 | 1722 | 1802 | 1912 | 1972 | 2042 | 2102 |
| ZSM400 | 4000 | 600 | 650 | 750 | 1825 | 950 | 1741 | 1821 | 1931 | 1991 | 2061 | 2121 |
| ZSM435 | 4350 | 500 | 550 | 650 | 1955 | 1080 | 1765 | 1845 | 1955 | 2015 | 2085 | 2145 |
| ZSM450 | 4500 | 400 | 450 | 550 | 2005 | 1130 | 1774 | 1854 | 1964 | 2024 | 2094 | 2154 |
M200–M450 are wide-view basic masts; ZSM360–ZSM450 are wide-view triplex full-free-lift masts. Forward / backward tilt is 5° / 7° for all.
For ZSM masts only, free lift without the backrest increases by 307.5 mm. The table prioritises the original values with backrest.
Weights are source mast-table values, not confirmed weights for optional batteries. CPD12SQ lead-acid M300 is 2050 kg in this table versus 2040 kg with battery in the main table; the discrepancy requires manufacturer confirmation. Maximum operating height, axle loads and lift speeds for non-standard masts are not supplied and must be confirmed.
Designed for material handling
Three-point seated electric counterbalance
0.8 / 1.0 / 1.2 t models
Lead-acid or lithium-ion configurations
900 mm width and 1150 mm wheelbase
3.0 kW AC drive and 4.5 kW lift motor
Solid tyres
On-board charger
Basic and wide-view triplex full-free-lift masts
Load curve and dimension information
At a 400 mm load centre the rated capacities are 800, 1000 and 1200 kg. The standard load point corresponds to the centre of an 800 mm cube. Permissible load decreases as the load centre increases.
Forward mast tilt, non-standard forks and loads wider than normal affect capacity. The source supplies no numerical curve points; no interpolation is implied. Standard-mast curves are not a guarantee for all high masts or attachments. Refer to the truck load plate and confirmed configuration.
Ast is right-angle stacking aisle width. The published Ast already includes clearance a = 200 mm; do not add it again. The original load-curve and dimension images were not supplied here.
Supplied product image
The supplied white-background image illustrates the lithium version. Other original technical images and the PDF were not supplied.
Open original product imageRequest your selected configuration
Share your load, working conditions and destination for a quotation.
